Darkglass vintage ultra, Руководство пользователя

Страница: 4 / 7

Controls
Master
: Whereas the Level Knob controls the output of the
overdrive section the Master volume adjusts the overall
volume of the unit. Ideal for fine tuning the output on clean
mode. It also serves as a DI level control.
Blend
: Mixes the clean and processed signals. The clean
signal remains at unity gain while the volume of the
overdriven signal is set by the Level knob, allowing for fine mix
tuning.
Level
: Sets the volume of the overdriven signal.
Drive
: Sets the amount of gain in the overdriven signal.
Attack Switch : Sets the amount of treble content to saturate:
The "Boost" setting emphasizes the treble content extra
clarity and presence. The "Flat" position leaves this register
untouched while the "Cut" position will reduce the amount of
high frequencies being saturated.
Grunt Switch:
Sets the amount of low frequency content to
saturate by selecting between three different bass boost
levels before the clipping stage.
Bass
: +-12dB @ 100Hz |
Lo Mids
: +-12dB switchable 250Hz,
500Hz and 1kHz |
Hi Mids
: +-12dB switchable 750Hz, 1.5KHz
and 3kHz | Treble : +-12dB @ 5kHz.
Direct Output
: A balanced version of the ¼” output, useful for
running into PA’s or studio mixing consoles.