© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on
www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
+32 50 71 81 40 / [email protected] /
www.dark.be
ASSEMBLY DOCTOR
ij-lamp
table
design Jacob de Baan for dark
V—22/08/22
1
Connect the plug.
2
Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
!!! Never connect the fixture on 220-240V ac without driver.
Lighting fixture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Alu-Metal-Brass
230 V
IP20
850°
