Darfon VOTANI, Руководство пользователя

Страница: 7 / 65

English
6
Dear customer
We congratulate you on the purchase of this Votani electric cycle.
This manual will explain how to use your Votani electric cycle. We strongly advise you to
read this manual carefully, so you can enjoy your Votani as long as possible. In this manual
you will find the most important tips for your Votani with pedal support, its control and its
use. In the back of the manual you can find an explana on on what to do in case you need
a guarantee and service. If you have any quesions or remarks after reading this manual,
feel free to contact your dealer. We wish you a lot of cycling enjoyment and many safe
kilometres on your new Votani.
We advise you to find enough space and time before you use an electric cycle for the first
time. Please be careful, read all instructions and check the condition of all parts. An electric
cycle reacts more quickly when it is active than a cycle without support. Please do not pedal
fast while starting. Your cycle will accelerate when the support is switched on. At first you
will need to get used to this. When you brake, use the rear brake first. This will immediately
interrupt the engine support. The front brake is more powerful. The support will stop when
speed of 25 km/h is reached. The support will stop when you stop pedaling; there will be a
slight delay.
Moderate your speed on slippery roads, with snow and in rainy circumstances. Riding your
e-bike is just like any other cycle. With the Shimano gear handle
you can decide in which gear you prefer to ride. You can continue pedaling when
you change gears. You are advised to start in low gear. This will improve the range. Starting
in a high gear will be like starting a car in a high gear. In that case the engine will need more
power to get moving. Your e-bike is just like that. If you start in a higher gear, the battery will
be drained to get you moving.
Cycling on an e-blke: