DB101 ADSL MODEM Manual
- 13 -
5 CONNECTION SETUP
There are different kinds of connection: Physical Layer Connection, PPP Dial-Up Connection and Private
Connection. They will be introduced individually in this section.
5.1 PHYSICAL LAYER CONNECTION
1. The Physical Layer Connection will automatically run after the telephone line is connected. The taskbar
shall be shown as below if the connection is good.
2. To check if the connection is OK, double click “ADSL CONTROL PANEL” on the desktop. If the following
box pop up, then the connection is fine.
Figure 5.1.1
3. To disconnect or reconnect, double click the icon
or
in the taskbar. A dialog box will
appear as figure 5.1.2. Click the “
Stop ADSL
” button to stop ADSL connection.
Figure 5.1.2
