Darco MedSurg Pro, Инструкция по эксплуатации

Страница: 5 / 28

1. Open the shoe using the hook and loop straps (A, B).
2. Please ensure that the foot is securely positioned in the shoe.
3. The shoe can be customized to the right or left foot by individually adjusting the hook and loop
straps (A, B).
4. Position the upper hook and loop strap A to the left or right so that the hook strap on both sides
is on the outside of the shoe. Fold it around the tab and secure it firmly. If needed, the length of
the upper hook and loop strap can be customized to fit.
5. The inner shoe tabs can optionally be placed over each other (C).
6. Close the shoe with the lower hook and loop fastener B such that the DARCO logo is on the
outside of the shoe.
Cleaning instructions
Hand wash
> If the shoe is slightly soiled, you can wipe it with a damp cloth or clean it with a soft brush.
> Do not dry the shoe in a dryer or on a radiator. Leave it to dry at room temperature.
Disposal
Dispose of after use. Please dispose of the packaging in an environmentally friendly manner.
Dispose of this product after use in accordance with applicable local laws and regulations.
Maintenance
The product does not require maintenance.
Technical data
Sizes 3 women’s sizes: WS (34 – 36.5), WM (37 – 38.5), WL (39 – 41)
4 men’s sizes: MS (39 – 41), MM (41.5 – 43), ML (43.5 – 45), MXL (45.5 – 47)
Colour Black | Low and high (ankle-spanning) version
Material Outsole: TPR
Insole: EVA
Upper material: PU foam, polyester
Liner: Polyester
Hook and loop straps: Nylon
Combination with other products
> Puzzle Insole®
> PegContour® Insole
> PegContour® Insole Uni
> PegAssist® Insole
> Relief Contour Insole
> Toe Cap
EN Use