6
I N S T R U C T I O N M A N U A L
Step 8
Insert the trigger lock spreader pole into one of the centre eyelets. Release the trigger to extend the pole and insert
into one of the end eyelets. Tension the bar to stretch the swag into shape then lock into position. Repeat this
process for the other spreader pole. The guy ropes and pegs can be used if required.
Now your Dirty Dee + swag set up is complete.
PACK DOWN
1. Partially close all the zips, door covers and window flaps, leaving them slightly open will allow for the air to
escape while rolling up. Remove pegs and guy ropes if used.
2. Release the trigger of the spreader poles and remove them from the eyelets.
3. Unclip the swag from the composite poles one at a time.
4. Disassemble all of the poles in preparation for step 5 below. Tip: Leave the MIDDLE poles in each sleeve to
make things easier for your next trip. Stow the END pole sections in the sleeve along with the MIDDLE pole
