background image

90

135

500

70

898

min. 790

max. 970

790

676

ø 340

Visit our Website at:

Electrical Rating:
270W (1.12A) Max. at 240V 50Hz

YEARS

WARRANTY

2

 distributed by

Robinhood Ltd.

P.O. Box 51 201, Pakuranga

Auckland, New Zealand

TEL: 64 (9) 272 5129
FAX: 64 (9) 272 5148

ISO9001 Certified

email: [email protected]

 for service of advice in Australia contact

Robinhood Aus. Pty Ltd

A.C.N 079 616 550

P.O. Box 4189, Mulgrave

Victoria 3170

TEL: 1800 648 556
FAX: 1800 628 577

email: [email protected]

RECOMMENDS UNIDUCT DUCTING

SYSTEMS FOR RANGEHOODS

104629 Issue C

ECN: 07 007.

P R O D U C T   D I M E N S I O N S

C A N O P Y   I N S T A L L A T I O N   I N S T R U C T I O N

All Dimensions are in millimeters

- 1 -

- 8 -

RIIC9PLUS

Summary of Contents for RIIC9PLUS

Page 1: ...9001 Certified email enquiries robinhood co nz for service of advice in Australia contact Robinhood Aus Pty Ltd A C N 079 616 550 P O Box 4189 Mulgrave Victoria 3170 TEL 1800 648 556 FAX 1800 628 577 email enquiries robinhood co nz RECOMMENDS UNIDUCT DUCTING SYSTEMS FOR RANGEHOODS 104629 Issue C ECN 07 007 P R O D U C T D I M E N S I O N S C A N O P Y I N S T A L L A T I O N I N S T R U C T I O N ...

Page 2: ...ed by children or persons not instructed in its correct use This appliance is not intended for use by young children or infirm persons without supervision MAINTENANCE Switch off or unplug the appliance from the mains supply before carrying out any maintenance work Clean and or replace the Filters after the specified time period Clean the hood using a damp cloth and a neutral liquid detergent This ...

Page 3: ...1a 7 1b INSTALLATION Drilling the Ceiling shelf and fixing the frame DRILLING THE CEILING SHELF Use a plumb line to mark the centre of the hob on the ceiling support shelf Place the drilling template 21 provided on the ceiling support shelf making sure that the template is in the correct position by lining up the axes of the template with those of the hob Mark the centres of the holes in the templ...

Page 4: ... brick ceilings of wall thickness of approximately 20 mm use 4 plugs 11 and 4 screws 12h 5 2 x 70 provided For wooden beam ceilings use 4 wood screws not provided For wooden shelf use 4 screws 12g M6 x 80 with washers 22 and nuts 23 provided Lower frame Fix the lower frame using the 8 previously removed screws adjusting the length according to the installation height hood body lower fixing surface...

Reviews: