DAQ PCI-EK01, Руководство пользователя

Страница: 25 / 34

PCI-EK01 Users Manual (Rev 1.0)
-
25-
http://www.daqsystem.com
each numbers are as follows.
No. Name Description Remark
1 Memory
read
When press button, it read from 0 to 100000h (total
1MByte) at memory and mark a number (8) area.
2 Memory
Write
When press button, it progressively write from 0 to
100000h at memory. So, first after execution
“Memory
Write
” and then execute “Memory Read”, it confirms a
correct data.
(Notice)When memory read/write, an Auto bit of ADC
becomes certainly
‘0’.
3 Access
Bits
It set up how does unit of the byte deal in case of
reading and writing at memory.
Not apply Currently
Always deal with
32bits
4 Write At It record designated data to a specific address area by
32 bits word.
5
Memory
Offset
When data value record to a specific address of memory,
it is a value of offset
16bit
Hexa-Decimal
6 Memory
Write Data
The data that will be written to a specific address of
memory.
When the data record to a specific address of memory, it
set up a value of Offset and Data that wanted value,
after that press
“Write At” button. You want check
whether exactly writing or not, you can confirm to press
“Memory read” button.
16bit
Hexa-Decimal
7
Progress
Bar
It marks a progress situation, when the memory reading.
8 Memory
Data
It marks a data which read it to memory.
9 I/O Write When press button, it is writing specific I/O address.
10 I/O Read When press button, it mark to a screen as reading
specific I/O address.
11 I/O Offset It set up Offset of the address that it want to read or write
in I/O area.
16bit
Hexa-Decimal
12 I/O Read
Count
It set up I/O data amount to read.
* The reading or writing if I/O is always 32bit DWORD.
Not apply Currently