UVC-FRM01 Users Manual (Rev 1.0)
-
4-
http://www.daqsystem.com
2. UVC-FRM01 Function
2.1 Board Block Diagram
As shown in [Figure 2-1], in the case of UVC-FRM01, the overall control is in charge of
FPGA Core Logic. Its main function is to receive video signals such as HD-SDI (high-definition
serial digital interface), NTSC (National Television System(s) Committee), and PAL (Phase
Alternation Line) through the external I/O connector to receive UVC (USB Video). Class) again
to the external connector. These functions can be performed immediately without using a
separate API.
The external I/O connector uses 51-pin Hirose DF9-51S-1V_SOCKET, and refer to Section
3.3.4 for detailed signal specifications.
UVC-FRM01
External I/O
FPGA Core Logic
HD_SDI
or PAL
Voltage
Regulator
D+
D-
Serial In
GND
SSTX+/-
SSRX+/-
UVC
Controller
5V
SDA
SCL
Mode_S
HD-SDI or
PAL
Selection
POWER
I2C
USB Signal
[Figure 2-1. UVC-FRM01 Block Diagram]