USB3-FRM14 Users Manual (Rev 1.1)
-
6
- http://www.daqsystem.com
2. USB3-FRM14 Function
2.1 Block Diagram
As shown in the following figure, main control of the USB3-FRM14 board is performed in
FPGA Core Logic. Primary functions are receiving the image frame data through two Mini
MDR-26 connector, and saving the DDR#1, DDR#2 memory, and transmitting to PC upon
request. You can control these functions using API through a USB 3.0 interface.
[Figure 2-1. USB3-FRM14 Functional Block Diagram]
The core logic program of the FPGA is loaded by JTAG. It saves a program at the FPGA
Program Logic and loads when power-up.
