USB3-FRM14 Users Manual (Rev 1.1)
-
29
- http://www.daqsystem.com
(3)
“Channel”
Select the SDI channel.
CH0 : Use the channel connected to J8 Connector.
CH1 : Use the channel connected to J3 Connector.
Dual : Two channels can be used simultaneously.
(3)
“Vanc Mode”
Select the VANC mode.
Disable : VANC mode of each channel is not used.
Y Vanc : The Vanc data is added to the Y packet of video of the configuration of the YCbCr.
C Vanc : The Vanc data is added to the C packet of video of the configuration of the YCbCr.
(4)
Vanc Data
It shows the values of Vanc Data of the first and the second packet.
DID --- Data Identification
SDID --- Secondary Data Identification
DC --- Data Count
CS --- Check Sum
Data --- User Data
4.3 Image Saving
(1)
“Auto Save” toggle
If the box clicks, image data is stored as a binary file below the specified
D:\Image
(or
user-selected folder). The bottom of “Save Count” shows number of stored frames.
