USB3-FRM13_K Users Manual (Rev 1.1)
-
41
- http://www.daqsystem.com
(10)
“Ext. Inverse”
: When selected, the external trigger waveform is inversely converted and
input.
“Ext. Enable”
: When selected, external trigger mode On/Off is executed.
“ENC A Inv.”
: When selected, the waveform of encoder A is converted and input.
“ENC B Inv.”
: When selected, inversely converts the waveform of encoder B and inputs it.
“ENC Z Inv.”
: When selected, the waveform of encoder Z is inverted and input.
“Line Trigger Inv.”
: When selected, the waveform of the Line Trigger is inversely
converted and input.
“Phase Trigger Inv.”
: When selected, the waveform of the Page Trigger is inverted and
input.
“Trigger Out1 Inv.”
: When selected, inversely converts the waveform of Trigger output 1
(CC1).
“Trigger Out2 Inv.”
: When selected, inversely converts the waveform of Trigger output 2
(CC2).
’
(11)
PoCL Delay
The delay time can be set when powering a camera using PoCL (Power over Camera
Link). It selects from 0.5 sec to 4 sec. The default value is 0.5 sec.
