USB3-FRM13_K Users Manual (Rev 1.1)
-
23
- http://www.daqsystem.com
3.3.5 J8 Connecter
It is an external 12V DC Jack power connector DC-005 (2.0) standard. If the USB power is
insufficient, you can program does not come out video or down.
If the power is insufficient, it will use this connector.
12V
1.0A
[Figure 3-6. Rated Output]
3.3.2 SW1 Switch
The USB3-FRM13_K_B board is designed of four maximum USB3-FRM13_K_B boards
at the same time so as usable. Distribution of each board sets it up through 4 pin switch in a
board.
1
ON
OFF
SW1
2
[Figure 3-7. SW1 Switch (Top View)]
[Table 7. SW1 PIN-OUT Description]
1
2
Description
OFF
OFF
Board No. 0
ON
OFF
Board No. 1
OFF
ON
Board No. 2
ON
ON
Board No. 3
