PCI-PID01 User‟s Manual
18
4-3
AMP Connection
This is an output AMP_OUT signal for PID control. It can be controlled the voltage, current
according J3 setup. Connect with an external device as shown in [Figure 4-3].
AMP_OUT
Gauge etc.
AMP_RTN
[Figure 4-3. AMP Connection]
4-4
PWM Output
PWM output is composed of Isolator and Line Driver as shown in [Figure 4-4]. To operate
the corresponding IC, internal or external power (E_+5V, 5VDC) is supplied. (Refer to 3.2.6
Settings)
[Figure 4-4. PWM Output Circuit]
