PCI-AIO02 Users Manual (Rev 0.8)
-
9-
http://www.daqsystem.com
3. Board Address Setup
If mounting works in one system that a lot of I/O ports are required, several AIO series boards are
classified according to each board address.
Distribution of each board sets it up through 4 pin DIP switch (SW1). A system is designed of
maximum four boards at the same time so as usable.
SW1 Setup
2 1
ON
OFF
1
2
Board No.
OFF OFF
0
ON
OFF
1
OFF
ON
2
ON
ON
3
