NET-AIO11 User’s Manual (Rev 1.0)
-
7-
http://www.daqsystem.com
3.5
Ethernet Connector (J11)
It connects to the Ethernet Hub or Ethernet Adapter. It automatically is detected
Cross/Direct cable.
3.6
POWER Connector (J6)
It is a power of the board, input over +5VDC, 1A.
J6
DC-JACK, 2mm
1
2
PCB
[Table 3. POWER Connector Description]
Pin No.
Pin Name
Description
Remark
1
+5VDC
Power 5V
2
GND
Power Ground
3.7
Digital Signal Input/Output Connector (J13)
It connects to each 8-bit Digital Input/Output signals. The isolated 12/24VDC signals can
be input or output. The circuit is as [Figure 3].
DIN_COM
DINx
BINx
+3.3V
BOUTx
DOUT0
+3.3V
22
330
2.4K
DOUT_COM
Input
Output
[Figure 3. Digital Input/Output Circuit]
