EMB-OPT02 User’s Manual
8
2-4
SW3 Switch
It is a 12V DV external power switch.
+12V
V_IN_12V
SW_T_SPOT
[Figure 2-4. SW3]
2-5 CN1
(SFP) Connector
In the case of EMB-OPT02, an SFP (Small Form Factor Pluggable) connector is used as a
Fiber-Transmission Transceiver device. The SFP transceiver is designed to support various optical
transmissions such as SONET, Gigabit Ethernet, and Fiber Channel. It supports hot-pluggable
transceiver and can be connected to network device motherboard with fiber or copper
networking cable.
SFP is connected to the module that connects to the cage and connector, and there are Tx
(Transceiver) and Rx (Receiver) together.
[Figure 2-5. SFP & SFP Cage]
