DAPAudio Xi Series, Руководство пользователя

Страница: 9 / 20

8
Xi-5/6/8/10
Back
Fig. 02
01)
Speakon connector IN
02) Speakon connector OUT
03) 4-pin Phoenix terminal connector
Installation
Remove all packing materials from the Xi. Check that all foam and plastic padding is removed. Connect
all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Installation of the Phoenix Terminal Connector
01) Loosen the 2 screws on the 4-pin Phoenix terminal power connector (03).
02) Remove the 4-pin Phoenix terminal power connector (03).
03) Connect an external device. Insert the cables correctly.
Fig. 03
04)
Put the Phoenix connector back in the device.
05) Tighten the 2 screws on the 4-pin Phoenix terminal power connector (03).