DAPAudio WCA Pack, Руководство по эксплуатации продукта, Страница: 11 / 17

10
Connecting the transmitter to a camera
Connect the 3,5 mm jack of the KAC50X camera cable into the AF out (13) and connect the XLR plug to
the camera.
Fig. 7
Charging the batteries
Place the receiver and transmitter in a free charging slot (25) of the battery charger. The corresponding
charging (26) LED will flash for a few seconds for initial testing and then light continuously while charging.
The charging (26) LED will dim if the corresponding battery is fully charged.
Fig. 8
Tips for achieving maximum performance
 Make sure you can always see a receiver from the transmitter position.
 Keep the distance from transmitter to receiver as short as possible.
 Avoid placing the receiver near metal surfaces and obstructions.
 Replace battery as soon as the power indicator (3, 12) LED of the transmitter or the receiver lights red.

Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the receiver. If dead spots remain, mark the dead spots and avoid them.