DAPAudio VPC-12, Руководство пользователя

Страница: 6 / 8

5
Ordercode: D6534
VPC-12
Description of the device
Features
 Line voltage: 100V
 Power consumption: 12W Do not connect speakers which exceed 12W
 Material: ABS
 Mounting: Flush, surface
 Mounting hole: Ø 50 mm
 Dimensions: 80 x 40 x 155 mm (LxWxH)
 Weight: 0,28 kg
Optional accessories
D6537 – CB-2 (2-unit cover box for volume controllers)
Installation
Remove all packing materials from the VPC-12. Check if all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Fig. 01
Set Up and Operation
See the diagram above (fig. 01). Make sure that you connect the appropriate cables to the appropriate
connectors:
01)
Connect the main feed cable (+) from the 100V amplifier to the respective IN+ connector (1A-6A).
02) Connect the common cable (-) from the 100V amplifier to the respective IN- connector (1B-6B).
03) Connect the common cable (-) from the emergency signal source to the E connector. Connect the
main feed cable (+) from the emergency signal source to the P connector.
04) The VPC-12 is equipped with the mute/emergency function. Connect the common cable (-) from
the 24V emergency switch to the – connector (above 1B-6B connectors). Connect the main feed
cable (+) from the 24V emergency switch to the + connector (above 1B-6B connectors).
05) Connect the common cable (-) to the OUT- connector, and connect the other end to the common
connector on your speaker.