DAPAudio TL-500, Руководство по эксплуатации продукта

Страница: 8 / 15

6
(24) AUDIO OUT L / R: This stereo line output connects to the line input on any DJ mixer.
(25) DIGITAL OUTPUT: This coaxial (S/P DIF) digital output connects to any RCA S/P DIF input, as found
on most standard computer sound cards, CD burners or any other recording device with a digital input.
(26) FADER START: Connects to any DJ mixer equipped with a fader start input. This enables the user to
start the CD from the cue point, using the mixer’s cross or line fader, depending on the mixer.
(27) VOLTAGE SELECTOR: Used to select the unit’s voltage according to the local setting. Note: Be sure to
check the switch before powering the unit.
(28) AC IN: This is the connection for the supplied power cable.
(29) POWER: This button is used to turn the unit ON and OFF.
Fig. 3 .
LCD
30)
TIME BAR: shows TOTAL REMAIN, REMAIN or ELAPSE time depending on the setting of the TIME
button. This bar will start flashing when 15 seconds of a track remain and will begin to flash
rapidly,when three seconds of a track remain.
31) ELAPSE INDICATOR: the time defined refers to a single track's elapsed time.
32) TOTAL REMAIN INDICATOR: the time defined refers to a disc's total remaining time.
33) REMAIN INDICATOR: the time defined refers to a single track's remaining time.
34) PLAY: lit while the unit is playing a CD.
35) TRACK: shows the track that unit is playing with.
36) MINUTES METER: This meter will display the elapse, total, or remaining time in minutes.
37) SECONDS METER: This meter will display the elapse, total, or remaining time in seconds.
38) FRAME METER: This meter will display the elapse, total, or frames.
39) SINGLE INDICATOR: Shows that the unit is in single play mode, the unit will play a single and then
return to CUE mode. If the SINGLE indicator is not shown, the unit is in Continuous mode.
In Continuous mode the drive will play through all the tracks on the disc. Once all the tracks have ended
the unit will return to cue mode.
40) PITCH METER: This meter shows the pitch percentage being applied to playback by the PITCH fader.
If the meter reads 0 regardless of the PITCH fader’s position, the PITCH function is not activated.