7
11)
Line out output
Line level electronically balanced Male XLR socket for linking several RX-18BA speakers.
12) Loudness button
This button allows you to activate the volume dependent loudness circuit. The intensity of the
loudness circuits depends on the actual volume level, thus ensuring optimal sound quality at all
volume levels.
13)
Line in input
Line level electronically balanced 3 pole XLR/ jack combo socket.
14)
Power Switch
Main power switch.
15)
AC inlet with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the
power cord to the connector, the other end to the mains, then turn on the
power (15)
switch to
operate the unit.
Note:
Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains.
Replace the fuse only with a fuse of same specification (T3,15A).
Operation
Installation
Remove all packing materials from the RX-18BA. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.
Do not supply power before all components of the system are set up and connected properly.
