DAPAudio PM-Six, Руководство пользователя

Страница: 7 / 12

6
Ordercode: D6182
PM-Six
Message bank
Press one of the 1-6 buttons to recall the desired preset message.
Repeat/Stop + Start/Stop buttons
Press one of the buttons to play the chosen message.
REPEAT/STOP: Press the button to play the chosen message. The message will be repeated until the
button is pressed again.
START/STOP: Press the button to play the chosen message. The message will be played once. Press
the button again to stop playback.
LED indicators
POWER: Power indicator
SEND: The indicator lights up when communication data is available.
BUSY: The indicator blinks when the line is busy. The TALK and MESSAGE BANK buttons will not work.
Zone selection b TALK button
Press one of the zone buttons 1-6 to choose the desired zone. Press the ALL button to activate all 6
zones, at maximum volume level.
If you use a single PM-Six, and Chime mode is active, press the TALK button, wait until the chime
sound passes, and then talk. When Chime mode is inactive, always press this button to talk.
If you use multiple devices and DIP switch # 2 is set to PRIORITY position, press the TALK button to talk.
If DIP switch # 2 is set to SLAVE position and the BUSY LED indicator blinks, it means that the line is busy
and you need to wait until the LED indicator stops blinking.
Backside
Fig. 02
USB connector B
Connect your PC to the device, in order to update the software or the chime sound.
Chime/Program switch
Insert a USB flash drive, containing updates. Set the selector to the section which you would like to
update.
Set the selector to CHI, if you want to update the chime sound.
Set the selector to PROG, if you want to update the software and audio priority setting.