background image

 

 

 

3 

 

  

 

 

Odin S-18 Line Array Sub 

Product code: D3971 

1.

 

Introduction 

 

Before Using the Product 

 

Important 
Read and follow the instructions in this user manual before installing, operating or 
servicing this product. 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual. 

After unpacking, check the contents of the box. If any parts are missing or damaged, contact your 
Highlite International dealer. 

Your shipment includes: 

 

DAP Odin S-18 Line Array Sub 

 

User manual 

 

 

Fig. 01 

 

Intended Use 

This device is designed to be used as a passive line array subwoofer. It is suitable only for indoor use. Any 
incorrect use may lead to hazardous situations and result in injuries and material damage. 

Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use. 

 

Text Conventions 

Throughout the user manual the following text conventions are used: 

 

References: 

References to chapters and parts of the device are in bold lettering, for example: 
“Refer to 2. Safety”, “press the power switch (03)” 

 

0–255: 

 

Defines a range of values 

 

Notes: 

 

Note: (in bold lettering) is followed by useful information or tips 

 

 

Содержание Odin S-18 Line Array Sub V1

























Отзывы: