DAPAudio NRG-12A, Руководство пользователя

Страница: 26 / 32

25
NRG-12A
Product code: D3655
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is designed to be used as an active full-range loudspeaker. It is suitable only for indoor use.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Switching On/Off
The device has a power switch.
● To switch the device on, press the power switch (13) in ON position.
● To switch the device off, press the power switch (13) in OFF position.
Bluetooth Connection
The NRG-12A has an integrated Bluetooth receiver with TWS (True Wireless Stereo). You can pair the
NRG-12A with a personal computer or a smartphone with Bluetooth (a streaming source device) to
stream sound. You can also link 2 NRG-12A devices to use them in stereo mode. See 5.5. Setup with a
Streaming Source Device on pages 23–24.
Pairing with a Streaming Source Device
You can pair the NRG-12A with a streaming source device via Bluetooth.
To pair the devices, follow the steps bellow:
Press and hold down the BT pairing button (10) until the BT pairing LED indicator (09) starts flashing.
Switch on the Bluetooth functionality on the streaming source device and scan for available
Bluetooth devices.
Select the NRG-12A from the list of available Bluetooth devices and pair the devices. When pairing is
completed and the devices are connected the BT pairing LED indicator (09) turns on.
To terminate the connection with a streaming source device via Bluetooth, press and hold down the
BT pairing button (10) until BT pairing LED indicator (09) starts flashing. When the connection is terminated,
the BT pairing LED indicator (09) turns off.
Note:
If you switch the device off and on again, the device automatically reconnects to the last connected
Bluetooth source device. If you want to pair the device to a different streaming source device, you need
to terminate the current Bluetooth connection.