DAPAudio NRG-12A, Руководство пользователя

Страница: 25 / 32

24
NRG-12A
Product code: D3655
Stereo Mode
In stereo mode 1 active full-range speaker is paired with the streaming source device and a 2
nd
active
full-range speaker is linked to the 1
st
active full-range speaker. The 1
st
active full-range speaker,
connected to the streaming source device, outputs the left channel of the stereo signal and the 2
nd
active full-range speaker outputs the right channel of the stereo signal.
To complete the stereo mode setup, follow the steps bellow:
Connect the 2 active full-range speakers to the power supply. See 5.6. Connecting to Power Supply
on page 24.
Switch on the 2 active full-range speakers. See 6.2. Switching On/Off on page 25.
Pair the 1
st
active full-range speaker with the streaming source device. See 6.3.1. Pairing with a
Streaming Source Device on page 25.
Link the 2
nd
active full-range speaker to the 1
st
active full-range speakers. See 6.3.2. Linking to
Another Device on page 26.
Adjust the gain controls of the 2 active full-range speakers. See 6.4. Adjusting the Gain on page 26.
Fig. 19
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other
voltage or frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected
to the ground (earth).
Before connecting the device to the socket-outlet:
Make sure that the power supply matches the input voltage specified on the information label on
the device.
Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug.