DAPAudio MP-220BT, Руководство пользователя

Страница: 23 / 28

22
MP-220BT
Product code: D1245
DIP Switches
Use the DIP switches (08) to set the signal priority and to activate phantom power.
Fig. 14
Phantom Power
To be able to use the paging microphone, you need to activate phantom power.
Move the DIP switch 3 to ON position, to activate phantom power.
Signal Priority
If the input devices are connected to the (Line 1–2) RCA analog line-level connectors IN (14) and they
are on, you can choose whether the music from the input devices will be muted or not, when you speak
into the paging microphone.
● Move DIP switch 1 to set signal priority for line 1.
● Move DIP switch 2 to set signal priority for line 2.
When the DIP switch is set to ON position, the input device will be muted when you speak into the paging
microphone. When the DIP switch is set to OFF position, the input device will not be muted.
Operation
The paging microphone holder has 3 buttons:
●
ZONE 1: Signal from the paging microphone will be sent to zone 1.
● ZONE 2: Signal from the paging microphone will be sent to zone 2.
● ALL ZONES: Signal from the paging microphone will be sent to all zones.
Press and hold down one of the 3 buttons and speak into the microphone.
Adjusting Settings
Turn the microphone bass level control (09) to the left/right to decrease/increase the bass level. The
adjustment range is from –12 dB to +12 dB.
Turn the microphone treble level control (10) to the left/right to decrease/increase the treble level. The
adjustment range is from –12 dB to +12 dB.
Turn the microphone gain control (11) to the left/right to decrease/increase the gain level. The
adjustment range is 0–10, from low to high.