3-36 / 122
¾
Select the modem you want use.
¾
Select “
Configure
”
(Figure 3-78)
¾
Under “
Connection Reference
”, use the default settings
provided. If you can’t connect using these settings, see
your ISP or network administrator for specific
information. If you want to always enter a phone number
before connecting, Select “
Manual Dial
”. Select “
OK
”.
¾
Select “
TCP/IP Settings
”
(Figure 3-81)
in the “
General
”
tab. ensure “
Use Server-assigned IP address
” is
selected. In the “
Name Servers
” tab, ensure “
Use
Server-assigned addresses
” is selected, and select
“
OK
”. If you are unable to connect with these default
settings, see your ISP or network administrator for
specific TCP/IP information.
¾
Select the “
Next
” button and type the telephone number.
¾
Select the “
Finish
” button.
The connection you just created appears as an icon in the
“
Network and Dial-up Connections
” folder.
9
Set up a
point-to-Point Protocol(PPP)
account with an
ISP and obtain the following information:
¾
Access telephone number
¾
User name
¾
Password
Once you have established an account, create a new
connection on your device. When creating this connection, you
should be able to use all of the default TCP/IP settings provided
in the Make New Connection Wizard. If you can’t connect using
the default settings, contact your ISP or access your ISP’s Web
site for specific TCP/IP information as well as primary and
secondary DNS address.
9
Modify connection setting
¾
Select
Start > Settings > Control Panel > Network and
Dialup Connections
¾
Select the icon for connection settings you want to
modify.
¾
Select
File > Properties
, or double- tap the appropriate
icon.