DAPAudio M1000 Скачать руководство пользователя страница 45

Страница: 45 / 122

2-27 / 122

Figure 2-21

Schemes Tab-Idle

Figure 2-22

Schemes Tab-Suspend

Suspending:

The following conditions will suspend:

Press <

Power

> key while the Device is on.

The duration timer of item “

Switch state to Suspend”

expires, which

indicates that there has been no use for a specified of time.

The battery pack is completely discharged.

2.6.2 Resuming

Use one of following methods to resume (wake up the Device):

Press <

Power

> key to suspend or resume (wake up).

When a battery pack completely discharges while the unit is in suspend mode,

the Device remains suspended until discharged battery condition is corrected.

2.7 Resetting the Device

2.7.1 Software (Warm) Reset

A warm reset is a transition from the on, idle, or suspend power state that close

all applications, clears the working RAM, but preserves the file system.

Reason to Warm Reset:

If an application “ hangs ”, initiate a warm reset to

terminate the application only.

Process to Warm Reset:

To a warm reset, press “

Alpha

” + “

Enter

”

buttons simultaneously.

Содержание M1000



























































































































Результаты поиска

Содержание M1000

Отзывы:

DAPAudio M1000, Руководство пользователя, Страница: 45 / 122

Результаты поиска

Содержание M1000

Отзывы: