DAPAudio entertainer mobile set basic, Руководство по эксплуатации продукта

Страница: 11 / 16

9
USB player
36. Status LED
Shows the status of the USB MP3 port.
37. USB port
Use this port to connect your USB stick for
playback/recording. Make sure that all MP3’s are
located in the root directory. The Entertainer mobile
set active will not recognize folders on a USB stick.
38. Play/pause button
Use this button to start playback. Press once to start
playback, twice to set the pause mode, and
again to resume playback.
39. Previous button
Tapping this button allows you to go back to
beginning of the track or select a previous track.
Holding this button increases the volume level of the
USB player.
40. Next/vol- button
Tapping this button allows you to skip to the next track. Holding this button decreases the volume level of
the USB MP3 player.
41. EQ
Tapping this button allows you to switch between different preset EQ settings.
AC inlet with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the power switch
to operate the unit.
Note: Please make sure that the supply voltage matches the operation voltage
before connecting the unit to mains. Replace the fuse only with a fuse of same
specification (T4A).
Rear storage compartment
On the rear you can find a small storage compartment. You can use this for storage of your cables.