DAPAudio EDGE EBT-1, Руководство пользователя

Страница: 11 / 20

10
EDGE EBT-1
Product code: D1478B
4. Setup and Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for use as a bodypack wireless transmitter. It is suitable for indoor use. It is not
suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Ambient Conditions
● The device can be used only indoors.
● The maximum ambient temperature t
a
= 40 °C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Setup
To set up the wireless bodypack system, follow the steps below:
Install the batteries in the device. See 4.3.1. Installation of the Batteries on page 10.
Install the headset, microphone or an instrument in the device. See 4.3.2. Connecting
Headset/Microphone/Instrument on page 11.
Switch on the device. See 4.3.3. Switching ON/OFF on page 11.
Pair the device with the receiver. See 4.3.4. Pairing on page 11.
Fasten the device to your clothes. See 4.3.5. Installation of the Bodypack on page 11.
Switch on the connected mixer/amplifier.
Installation of the Batteries
The device is delivered without batteries. It accepts 2 x AA LR6 (alkaline) batteries.
To install the batteries:
Open the battery housing (10).
Insert 2 x AA LR6 (alkaline) batteries into the battery housing (10).
Close the battery housing (10).
Fig. 07
Note:
Make sure that you install the batteries with correct polarity orientation.
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.