DAPAudio EDGE EBS-2 V2, Руководство пользователя

Страница: 19 / 36

18
EDGE EBS-2
Product code: D1480B
Connecting the Receiver to Mixer/Amplifier
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
The receiver has 2 balanced 3-pin XLR output connectors.
To connect the receiver to a mixer or an amplifier:
01) Make sure that the receiver is not connected to power supply and the volume is turned down.
02) Make sure that the mixer or the amplifier are switched off and the volume is turned down.
03) Use a 3-pin XLR audio cable to connect the 3-pin XLR AF balanced OUT (13/16) of the receiver to the
XLR input connector of the mixer/amplifier.
Switching ON/OFF – Receiver
The receiver has a power button.
● Press and hold down the power button (07) for 2 seconds to switch on the receiver. The LCD display
(01) lights up.
● Press and hold down the power button (07) for 2 seconds to switch off the receiver. The receiver
remains energized.
Note:
The mains plug is used as a disconnect device. Disconnect the AC power adapter from the socket-outlet
to disconnect the receiver from the power supply.
Installation of the Batteries
The device is delivered without batteries. It accepts 2 x AA LR6 (alkaline) batteries.
To install the batteries:
Open the battery housing (31).
Insert 2 x AA LR6 (alkaline) batteries into the battery housing (31).
Close the battery housing (31).
Fig. 15
Note:
Make sure that you install the batteries with correct polarity orientation.
Connecting Headset/Microphone/Instrument
The device has a 4-pin connector, to connect a headset, microphone or an instrument to the transmitter.
Plug the device of your choice into the 4-pin mini XLR connector IN (29).