DAPAudio EDGE EBS-2 V2, Руководство пользователя

Страница: 17 / 36

16
EDGE EBS-2
Product code: D1480B
Installation of the Antennas
The device is delivered with 2 antennas. The antennas are not connected. To install the antennas:
Insert the 1
st
antenna into the 12–15 V DC BNC connector (08).
Insert the 2
nd
antenna into 12–15 V DC BNC connector (11).
Point the antennas away from each other at an angle of 45° (Fig. 13).
Fig. 13
Note:
● Do not use the antennas near metal surfaces or other obstructions.
● Make sure that the antennas do not cross when multiple wireless systems are used.
Connecting to Power Supply
Attention
Incorrect handling of the AC power adapter may result in hazardous situations
This device is delivered with an AC power adapter. Incorrect handling of the AC power adapter may
result in hazardous situations.
● Connect the receiver to the socket-outlet with the delivered AC power adapter. Use only the AC
power adapter delivered with the device.
● Make sure that the socket-outlet is easily accessible.
● Disconnect the AC power adapter from the socket-outlet when the device is not in use.