DAPAudio DS-CDJ-250 MKII, Руководство по эксплуатации продукта, Страница: 15 / 20

13
6. Pausing
• Press the Play/Pause button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Playback resumes when the Play/Pause button is pressed again.
7. Setting a Cue Point
• Press the Play/Pause button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Turn the Shuttle Wheel to go to your desired Cue point.
• Press the Play/Pause button again and your Cue point has been stored and the CD will continu.
8. Cueing
• "Cueing" is the action of preparing for playback.
• Press the
Cue button, the player will enter Cue-Mode, the playback returns to cue point and enter
pause condition, the Cue indicator lights up and the Play indicator flashes. When Play/Pause button is
pressed, play starts from the cue point.
• When the track search operation is completed after pressing the
Skip buttons, the player automatically
finds the position at which the sound starts and cues there (Auto Cue).
• If the
Cue button is pressed after the search operation or the scanning operation, the playback returns
to the cue point and enters pause condition.
NOTE : During cue mode, if the Cue button is pressed and hold, playback will start from the cue point,
when the button is released, the player will return to the cue mode automatically, it allows you to
check the cue point.
9. Frame search
• Frame search is a function for monitoring the sound at a certain section of the disc and manually
Changing the position. Searching is used to set a starting point with precision.
• Turn the
Shuttle Wheel while in pause or cue mode to begin searching. The sound for one revolution of
the disc is output repeatedly. The point at which the sound starts is indicated on the LCD.
• When the
Shuttle Wheel is turned, the point from which the sound output moves is the a number of
Frames corresponding to the number of the milliseconds, and the time display on the LCD also
changes.
• The search point moves in the forward direction when the
Shuttle Wheel is turned clockwise. When the
Shuttle Wheel is turned counterclockwise, the search point will moves backward.
10. Scanning (Fast forward/Fast backward)
• Scanning is a function for moving quickly forward or backward while rotating the Shuttle Wheel .
• Turn the Shuttle Wheel to begin scanning. The disc moves rapidly forward or backward and the sound is
audible. The current scan point is indicated on the LCD.
• Turn the
Shuttle Wheel clockwise to scan in the forward direction, counterclockwise to scan in the
reverse direction.
11. Time Display
Press Time button to select time display mode:
1. Elapsed time of a track (ELAPSED).
2. Remaining time of a track (REMAIN).
3. Remaining time of the disc (TOTAL REMAIN).
12. Changing Pitch of the song
There are three tools available for matching the BPM of the CD:
1. Use the
Pitch slider to adjust the BPM.
2. Use the Pitch Bend buttons to change the BPM temporarily.
3. Turn the Shuttle wheel to change the BPM temporarily.
1) Pitch-Slider
• To adjust the BPM by sliding the pitch slider up or down, press the Pitch button to turn on
the Pitch adjustment function.
• Slide the Pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is +-12%.