18
DCP-24 MKII Digital Cross Over
Product code: D2083
6.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for use as a professional digital crossover. It is suitable only for indoor installation.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Main Menu Options
In the main menu you can perform the following actions:
●
adjust the routing settings
see 6.2.1. Routing
●
load presets
see 6.2.2. Load
●
save presets
see 6.2.3. Save
●
lock/unlock the main menu
see 6.2.4. Access Level
●
view serial number/firmware/hardware version
see 6.2.5. Version Info
Routing
In this menu you can adjust the routing settings.
01)
Press the menu button (08) until the display shows:
02)
Turn the jog wheel (09) to the left/right to select one of the 3 options:
●
STEREO 1-WAY
(Channels: In AB, Out 12, Out 34)
●
STEREO 2-WAY
(Channels: In AB, Out 12, Out 34)
●
MONO 4-WAY
(Channels: In A, In B, Out 1, Out 2, Out 3, Out 4)
Load
In this menu you can load the saved presets.
Note:
To be able to load presets, create at least 1 preset. See 6.2.3. Save on page 19 for more information.
01)
Press the menu button (08) until the display shows:
02)
Turn the jog wheel (09) to the left/right to select one of the 50 preset slots.
Notes:
When a preset slot is occupied, the display shows the name of the preset.
When a preset slot is free, the display reads “EMPTY”.
