8
21. 8
Ω
terminal
Connect this terminal to the + terminal of your 8
Ω
speaker(s). In case of using several speakers.
Make sure that the total speaker load is 8
Ω
. The total power rating of the low impedance speakers
connected to this terminal summed, should be at least 30W.
22. 100V terminal
Connect this terminal to the + terminal of your 100V speaker(s). In case of using several speakers make
sure all speakers are wired in parallel.
The total power rating of the 100V-speakers connected to this terminal summed, should never exceed
30W.
23.
AC Inlet with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the
power (14)
switch to operate the
unit.
Make sure that the supply voltage matches the operation voltage before connecting the unit to mains.
Replace the fuse only with a fuse of the same specification (230V:T800mA, 115V:T1,6A).
24.
GND Screw
This screw offers a separate ground connection. Can be useful in case of grounding problems.
25. 4
Ω
terminal
Connect this terminal to the + terminal of your 4
Ω
speaker(s). In case of using several speakers.
Make sure that the total speaker load is 4
Ω
. The total power rating of the low impedance speakers
connected to this terminal summed, should be at least 30W.
26. 70V terminal
Connect this terminal to the + terminal of your 70V speaker(s). In case of using several speakers make
sure all speakers are wired in parallel.
The total power rating of the 70V-speakers connected to this terminal summed, should never exceed
30W.
27. Line out
RCA stereo line lvel output for connecting a recording device or an additional amplifier.
28.
Line 3 input
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
29.
Line 2 input
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
30. Mic 3 input
Mic level XLR input for channel 3. Accepts balanced and unbalanced inputs.
31. Mic 2 input
Mic level XLR input for channel 2. Accepts balanced and unbalanced inputs.
