7
9. Master control
Use to adjust the volume level for each channel to your preference.
10. Mic 1 input
Mic level balanced TRS jack input for channel 1. Accepts balanced and unbalanced inputs.
11.
Priority button
Pushing this allows you to switch the PA-306 in priority mode. In priority mode, all channels except
channel 1 are muted as in the (optional) microphone connected to channel 1 is picks up a sound.
12.
Siren button
Pushing this button will start the siren.
13.
Line 1 input
3,5mm stereo mini jack input for connecting a line level device such as an I-pod, CD player etc.
14. Clip LED
The clip LED indicates peak levels at the output of the amplifier. If the clip LED frequently blinks or lights
continuously, the output is likely to enter clipping. If this happens, we strongly suggest lowering the
master
(9)
control.
15. Signal LED
Indicates an audio signal is present at the output.
16. Power LED
Indicates, the device is switched on.
17. AC power switch
This is the main Power switch. Press to turn the amplifier on.
Backpanel
Fig. 2
18. AC-selector
Before connecting your PA-306 to the mains, make sure the AC-selector is set to the proper voltage used
in your country. If you’re not sure, consult a skilled technician.
19. DC 12V 5A terminal
DC 12V input (battery)
20. Common speaker terminal
Connect this terminal with the – terminal of your low speaker(s).
