DAPAudio D2612, Руководство пользователя

Страница: 16 / 28

15
PSS-106 Battery Speaker
Product code: D2612/D2613
Option 3: installation as a floor monitor
The device functions only as a floor monitor. This
way, the artist is able to hear his own output
during performance.
There is a HPF (high-pass filter) button at the side
of the device that gets pressed when you install
the device in this position. The HPF cuts off lower
frequencies which leads to cleaner microphone
output sound.
Fig. 09
Charging the Battery
DANGER
Risk of explosion caused by incorrect handling
This device contains a built-in rechargeable lithium-ion battery. The battery is not replaceable. The
battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures.
● Do not open the device and do not attempt to remove the built-in battery.
● Do not charge the device in the transport bag.
This device is delivered with an IEC to Schuko power cable that is used to charge the battery. Before
connecting the power cable to the socket-outlet, make sure that the power supply matches the input
voltage specified on the information label on the device.
To charge the battery follow the steps below:
Set the power switch (04) to OFF position.
Connect the IEC power cable to the device. Use only the IEC power cable delivered with the
device. Connect the IEC power cable to the socket-outlet.
Set the power switch (04) to RECHARGE position.
During charging, the Recharge LED indicator (24) is red. When charging is completed, the Recharge LED
indicator (24) lights green.
● Charge the battery before using the device for the first time.
● Do not deep discharge the battery as this will shorten the battery’s lifetime. Recharge the battery as
early as possible. Do not let the light run until the battery is depleted.
● Make sure that the battery is charged to at least 50 % before storing the device.
It is recommended to charge the device at an ambient temperature between 0 °C and 35 °C.
Refer to 3.6. Product Specifications on page 12 for the charging time of the battery.