DAPAudio D2288, Руководство пользователя

Страница: 13 / 24

12
GIG-244CFX
Order code: D2288
33. STEREO GRAPHIC EQUALIZER
This equalizer gives you up to 12 dB boost or cut at 63 Hz, 160 Hz, 400 Hz, 1 KHz, 2.5 KHz, 6.3 KHz and 16
KHz.
34. ACTIVATE STEREO GRAPHIC EQUALIZER
With this button you can activate the stereo graphic equalizer.
35. PHANTOM LED (+48V)
This LED lights up when the phantom power is switched on for the microphone inputs.
36. POWER LED
This LED lights up when the power is switched on.
37. DIGITAL EFFECTS
It displays the selected preset.
38. PROGRAM(PUSH)
Turn this knob to select the desired effect. There are 100 options: Echo, Vocal, Plate and versatile two-
effect combination. Press the button to activate the chosen effect.
39. OUTPUT LEVEL VU INDICATOR
This stereo 12 segments LED meter will indicate the level of the overall output signal.
40. FX MUTE
Press this switch if you want to mute the signal from the internal effect.
NOTE: the effect can be turned on/off also by means of a footswitch connected to the FOOT SWITCH
jack socket (68).
NOTE: If the peak LED flashes this means that the signal is too high, near to the clipping of the effect input
stage. In this case, reduce the level of the AUX 4 / FX CHANNEL (sends) or AUX 4 / FX MASTER.
41. AUX1/AUX2 (SENDS)
The master AUX send control adjusts the signal volume level of the respective AUX send connector. This
way you adjust the sum of the AUX signal on the input channels.
42. AUX1/AUX2 (EFX)
It adjusts the level of the internal effect signal sent to the AUX 1 and AUX 2 output.
43. AUX3
The master AUX send control adjusts the signal volume level of the respective AUX send connector. This
way you adjust the sum of the AUX signal on the input channels.
44. AUX4/FX CHANNEL (SENDS)
This is the master FX control for adjusting the volume of all FX send signals at the input of the built-in effect
processor.
45. FX OUT
It adjusts the level of the internal effect signal sent to the FX OUT OUTPUT (67).
46. AUX4/FX MASTER (EFX)
It adjusts the level of the internal effect signal sent to MAIN output.
47. MUTE GR 1-2
The MUTE switch mutes the output of group 1-2.
48. MUTE GR 3-4
The MUTE switch mutes the output of group 3-4.
49. CHANNEL FADER GROUP 1-2
Use this fader to control the output level of the subgroup mix.