29
Product Specifications
Model: DAP Audio DCP-26
DSP:
Sample rate:
48 kHz, 64 bits NXP (Philips) DSP,
Inputs:
Input impedance:
10 kOhm balanced
Max input voltage:
+22 dBu
Input dynamic range:
110 dB
Input selection:
Any Input can be mixed to any output
Input Gain Control:
-50 dB to +12 dB in 0,25 dB steps
EQ Sections on each Input and Output
EQ selections:
Allpass, Bell, High Shelf, Low Shelf, Notch
Input EQ:
Type:
10-bands EQ.
EQ Selections:
Allpass, Bell, High Shelf, Low Shelf, Notch
EQ Frequency Selection:
20 to 20.000 Hz in 1 Hz steps on all EQ’s
Allpass EQ:
Q from 0.20 to 25 in 0,1 steps
Bell EQ (PEQ):
Q from 0.20 to 25 in 0,1 steps
EQ gain form -12 dB to +12 dB in 0,25 dB steps
Low Shelf (SEQ):
Shelf slope from 3 dB/oct to 25 dB/oct in 0,1 dB/oct steps
Low Shelf gain form -12 dB to +12 dB in 0,25 dB steps
High Shelf (SEQ):
Shelf slope from 3 dB/oct to 25 dB/oct in 0,1 dB/oct steps
Low Shelf gain form -12 dB to +12 dB in 0,25 dB steps
Notch Filter:
Q from 10 to 50 on 0,1 steps
Outputs:
Output Impedance:
100 Ohm balanced
Max output voltage:
+9 dBu
Output Gain Control:
-50 dB to +12 dB in 0,25 dB steps
Frequency Response:
20 – 20,000 Hz, (-0.1 dB)
Dynamic range:
114 dB
Output delay:
Channel independent from 0 to 5 mS
Output delay steps:
21 µS steps from 0 to 5 mS
Output EQ:
Type:
10-bands EQ, same as Input EQ
Crossovers:
Types:
Linkwitz Riley, Bessel and Butterworth
Slopes:
6, 12, 18, 24 dB/octave
Crossover frequencies:
20 to 20.000 Hz in 1 Hz octave steps
Crossovers available at Input and Output sections
Limiter:
Threshold points:
-50 to +9 dBu in 0,25 dB steps
Attack time:
Zero Attack Time Limiter
Release times:
1 = shortest, 100 = endless long, in steps of 1.
