13
38. Microphone volume control
Use
to adjust the volume of the microphone channel.
39. Headphones output
You can connect a pair of headphones with a minimum impedance of 32 Ohm to this stereo TRS ¼”jack.
The jack should be wired as tip=left, ring=right and sleeve=ground
Back Functions
40. USB connector
To connect your Core Kontrol D1to a PC / laptop/ Mac.
41. Master TRS jack out L/R
Use these outputs to connect an amplifier/mixer with balanced inputs.
42. Master RCA out L/R
Use these outputs to connect an amplifier/mixer with unbalanced inputs.
43. Touch sensitivity trimmer A/B
Use these trimmers to adjust the touch sensitivity of the jogwheel.
Operations
Selecting Folders
• Make sure you’re in the
file system/ folder structure panel
(see page 22).
Hold the
shift
(29)
button and
push the
load A/
back
(27)
button
to return to the
file system/ folder structure panel
if you are in the
file/ search results panel.
Dial the
track select (35)
encoder to browse the folders.
• Push the
track select (35)
encoder to open the desired folder. Now you’re in the
file/ search results
panel
and are ready to select a track as described before.
• Push the
load A/
back
(27)
button to return to the
file system/folder structure panel
.
Selecting tracks using the track select encoder
• Make sure you have opened the desired folder as described in
Selecting folders
and that you are in
the
file/ search results panel
(see page 22)
• Dial the
track select (35)
encoder to browse the tracks.
• Push the
load A/
back
(27)
button
or the
load B/
view
(36)
button to load the track in respectively deck
1 or deck 2.
Starting Playback
• Push the
play/
smart play
(21)
button during the pause mode or cue mode to start playback, the LED
in the
play/
smart play
(21)
button lights up.
Stop Playback
There are two ways to stop playback:
• Push the
play/
smart play
(21)
button during playback to pause at that point.
• Push the
cue/
smart cue
(8)
button during playback to return to the cue point and enter pause
condition.
Pausing
• Push the
play/
smart play
(21)
button to pause playback.
• The
play/
smart play
(21)
button blinks when the pause mode is set.
• Playback resumes when the
play/
smart play
(21)
button is pushed again.
Setting a Cue Point
• Push the
play/
smart play
(21)
button to pause playback.
• The
play/
smart play
(21)
indicator flashes as the deck is in pause mode.
• Dial the
jogwheel (7)
to go to the desired cue point.
• Push the
cue/
smart cue
(8)
button and your cue point will be stored. The cue point will be indicated in
the waveform display as shown in figure 6 on page 14.
• Push the
play/
smart play
(21)
button to continue playback.
Содержание Core Kontol D1
Страница 29: ......
