DAPAudio COM-54, Руководство пользователя

Страница: 8 / 20

6
Backview
Fig. 3
7)
Antenna B
8) Channel 4 balanced out
9) Channel 3 balanced out
10) Channel 3 balanced out
11) Channel 1 balanced out
12) Mix balanced out:
Balanced XLR connector mixes all four channels into a single output
13) Mix unbalanced out:
Unbalanced 1/4” jack plug connector mixes all four channels into a single output
14) Antenna A
15) Power Input Connector 12V 600mA
16) Fan
Installation
Remove all packing materials from the Com-54. Check that all foam and plastic padding is removed. Put
the 2 antennas into socket A and B at the backside in a vertical angle. Remove the rubber protection
caps at the underside of the microphones that covers the recharge inputs (See Fig 4).
Fig. 4
When connecting the power supplies, assure yourself that the right supplies are connected to the right
devices. Look at the red/green sticker at the bottom of the microphone.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.