DAPAudio COM-31 Guitarist, Руководство пользователя

Страница: 10 / 17

8 8
Problem Indicator status Solution
No sound. Red transmitter LED is not
Slide transmitter POWER ON/OFF switch
blinking. in ON position. Make sure battery is
placed correctly, replace with a fresh
battery
No sound. Red transmitter LED is
Slide transmitter MUTE/ON switch in
blinking. ON position
No sound.
Red receiver POWER LED
Make sure AC adapter is securely
dims. plugged into electrical outlet and into
the DC input connector. Make sure
the electrical output works and
supplies the proper voltage
No sound.
Receiver DIVERSITY A/B LED's Turn up receiver volume control.
light.
Confirm that the output connections
between receiver and external
equipement are correct and in good
condition.
No sound.
Receiver DIVERSITY A/B LED's Confirm that the transmitter and
dim. Transmitter and
receiver frequencies match. Move the
receiver POWER LED's light.
transmitter closer to the receiver.
Sound levels differ
Receiver DIVERSITY A/B LED's Readjust transmitter gain level to
f l l f from level of a li h light. f diff i i compensate for differences in guitar
cabled instrument. outputs.
Distortion level
Receiver DIVERSITY A/B LED's Replace transmitter battery.
increases gradually. and BATTERY LOW LED light.
Bursts of noise or
Receiver DIVERSITY A/B LED's Identify potential sources of
other audible light. interference (other RF-sources) and
signals present. turn them off. Remove or use a
wireless system operating on a
different frequency.
Momentary loss of
Receiver DIVERSITY A/B LED's Reposition receiver and perform a
sound as trans- dim when sound is lost. walk through test again. If audible
mitter is moved drop-outs persist, mark "dead spots"
within the and avoid them during performance.
performing area.