13
Scanning Fast forward
• Forward Scanning is a function for moving quickly forwards while being in playback mode.
• While pressing and holding the
search (7/47)
button for more than 1 second, the disc moves
rapidly forward and the sound is audible. The current scan point is indicated on the LCD.
Scanning Fast backwards
• Backward Scanning is a function for moving quickly backwards while being in Playback mode.
• While pressing and holding the
search (6/38)
button for more than 1 second, the disc moves
rapidly backwards and the sound is audible. The current scan point is indicated on the LCD.
Setting a cue point
• Push the
play/pause (17/37)
button to toggle between play mode and pause mode.
• The
play/pause (17/37)
button and the
cue (16/36)
button will flash when the unit is in pause mode.
• Use the
search (6/38)
and/or
search (7/47)
buttons to cue modeIn go to your desired cue point
(is necessary).
• Push the
play/pause (17/37)
button again and your cue point has been stored and playback will
continue.
Cueing
Cueing is the action of preparing for playback.
• Push the
cue (16/36)
button, the player will enter the cue mode, the playback returns to the cue point
and enters pause mode condition, the LED in the
play/pause (17/37)
button will blink. Pushing the
play/pause (17/37)
button will start playback from the cue point.
Repeat mode
Two different repeat modes are available: REPEAT 1 and REPEAT ALL.
When you press
repeat (18, 33)
during playback, you can choose between the following play modes:
1.
REPEAT 1: Repeats a single track several times.
2.
REPEAT ALL: Repeats all tracks several times.
Time display
Pushing the
time (20/35)
button to select between 3 time modes:
1
. Elapsed time of a track (
ELAPSED
).
2.
Remaining time of a track (
REMAIN
).
3.
Remaining time of the disc (
TOTAL REMAIN
). This display mode can only be activated if a disc is
formatted as a CD.
Changing pitch of the song
There are three tools available for matching the BPM of the CD:
•
Use the pitch encoder to adjust the BPM.
1.
Adjust the BPM by dialing the
pitch encoder (11)
up or down.
2.
Dial the
pitch encoder (11)
counterclockwise to decrease BPM, or clockwise to increase BPM. The
adjustment range is +/- 16%.
•
Use the pitch bend buttons to change the BPM temporarily.
1.
The BPM increases or decreases respectively while the pushing the
pitch bend + (23/49)
of
pitch bend
– (31)
button.
2.
The BPM increase depends on how long you hold the button. If you hold the button for about 5
seconds, the BPM will go + 16% for
pitch bend + (23/49)
or - 16% for
pitch bend – (21/55)
. If you tap the
button, the BPM will only change a little so you can change the beat slightly without an audible
change in the music.
3.
The CD will return to the BPM set with the
pitch encoder (11)
when you release the
pitch bend + (30)
and
pitch bend – (21/55)
buttons.
