DAP Technologies MICROFLEX CE8000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 62

DAP Technologies MICROFLEX CE8000 Скачать руководство пользователя страница 7

3

_MAN40-A (CMU040-A3)

A WORD FROM DAP TECHNOLOGIES

Dear MICROFLEX CE8000(LS) Series Owner:

Thank you for purchasing a DAP Environmentally Rugged Hand-Held Computer product. It is our
pleasure to welcome you to our worldwide family of satisfied MICROFLEX owners. Manufactured
under the rigid international quality standards of ISO 9001, DAP products have earned a reputation
for quality and field reliability.

Please read this USER’S GUIDE carefully as to enjoy the full range of capabilities characteristic of
DAP’s continuing efforts to provide advanced portable computing technology. The User’s Guide
provides you with all the information you will need to operate the unit. Should you need information
about a particular application, refer to the User’s Guide provided with that application.

While we would expect you to receive consistent and reliable performance from your CE8000(LS)
Series units, we do recommend you consider protecting your investment by purchasing a DAP CARE
Maintenance Agreement. You will enjoy all the special benefits by signing up now, even though you
will not be billed until the end of your warranty period. Please contact your sales representative for
more information and for DAP CARE rates.

DAP TECHNOLOGIES continues to develop exciting new hardware products, as well as
enhancements to existing products, that will greatly increase the capabilities through the life of your
current system.

If, for some unexpected reason, this product does not meet our printed specifications and your dealer
is unable to make a satisfactory adjustment, please write, fax or call us at the applicable DAP address
shown below:

DAP TECHNOLOGIES
(Canada)

955 Rue Fernand Dufour
Vanier Quebec
France G1M 3B2
Tel. : (418) 681-9394
Fax : (418) 681-0799

Email :

[email protected]

DAP TECHNOLOGIES Corp.
(USA)

14502 N. Dale Mabry
Suite 227
Tampa, FL 33618-2072
USA
Tel. : (813) 969-3271
Fax : (813) 969-3334

Email :

[email protected]

DAP TECHNOLOGIES
(Europe)

6 Place du Village des Barbanniers
92632 Gennevilliers Cedex
France
Tel. : 33 (0) 1-41 21 95 95
Fax : 33 (0) 1-41 21 95 65

Email :

[email protected]

«
...
5
6
7
8
9
...
»

Содержание MICROFLEX CE8000































































Отзывы:

Нет отзывов