DAP Technologies MICROFLEX CE8000, Руководство пользователя, Страница: 62 / 62

58
_MAN40-A (CMU040-A3)
They are two ways to reset the CE8000 Series unit
•
By Software
(Supervisor mode required)
To access the software reset you must enter the supervisor password. Go
under the
Style menu , choose Supervisor Mode and than enter the
supervisor password.
After entering the supervisor password, you will now have access to the
software reset option under the
Style menu.
A reset password can be asked to complete the software reset correctly,
contact your system integrator if such password is required.
•
By Hardware
To do a hardware reset simultaneously press the B + O + S keys for a few
seconds. A message box will be displayed while applications are closed and
the unit will reset at the end of this process.
WARNING: Never remove the battery to reset the unit. This
can cause the corruption of the running
applications and can also damage the data
present in the Storage Flash.
In all of these cases, contact your supervisor or the application program
supplier. If the problem cannot be resolved, contact the equipment supplier or
DAP TECHNOLOGIES. A reset of the unit may correct the problem or it
may be necessary to return the unit to a DAP Service Center.