The first thing to do with your Rhine Spa is to set the time.
In order to do this, hold down the
M
button for 5 seconds until
rtC
flashes on the screen
Use the
button to change the minutes
Use the
button to change the hours
Once you’ve selected the correct time wait for 4 seconds and it will go back to the main screen.
Press and hold
M
for 5 seconds until
rtC
flashes on the screen. Press again for
FSt
- this is Filtration Start
Time. During filtration the system is cleansing itself, purifying the pipeline equipment and heating the water.
This should ideally bet set to a time when you are asleep and therefore not going to be using the tub. We
recommend about 4am.
Use the
button to cycle between times
Once you have set a time press
M
again until
FTl
appears. This is the duration of the filtration cycle. We
recommend 2 hours. Use the arrows to select a time.
If you press
M
again and see
Adj
, please ignore this. This is to fine tune the temperature sensors in the spa
and is only to be used by a Danz Spas technician.
Содержание RHINE
Страница 1: ...Instruction Manual RHINE SPA...
