Danube WED 8, Инструкция по установке, использованию и техническому обслуживанию

Страница: 92 / 105

48
36. 20, 22, 24, 26, 28, 30. Delay n
This is the time taken between the detection of water in the tub and the start of dosage of
additive n. The possible values are:
0 to 99 sec. in steps of 1 sec. : delay time in seconds.
Once all the parameters to be introduced are known, we return to the main programming menu.
PROGRAM NAME
PHASE NAME
→
BLOCK
PROGRAM
After pressing the ENTER key we have three options:
CREATE BLOCK
COPY BLOCK
CHANGE BLOCK
6.1 Create block
This command allows for a new block to be created. The steps to follow are the following:
¾
After selecting CREATE BLOCK, press the ENTER key:
CREATE BLOCK
Block 35
Text:
▊
¾
With the INC (
∧
) and DEC (
∨
) keys, the character where the cursor is can be modified;
with the ADVANCE key (>>) the cursor goes on to the next character; the INFO key
changes from upper to lower case and to special characters. Press ENTER to validate the
selection.
CREATE BLOCK
Block: 35
Text: wash
Stop programme: N