Danube WED 8, Инструкция по установке, использованию и техническому обслуживанию

Страница: 86 / 105

42
4.3 Change name
This command allows for changing the name of a programme amongst those created by the
user. The steps to follow are the following:
¾
After selecting CHANGE NAME, press the ENTER key and the first available name will
be displayed. For example:
CHANGE NAME
BLANKETS
¾
With the INC (
∧
) and DEC (
∨
) keys, the name to be modified is selected. Press ENTER
to validate the selection.
¾
With the INC (
∧
) and DEC (
∨
) keys, the character where the cursor is can be modified;
with the ADVANCE key (>>) the cursor goes on to the next character; the INFO key
changes from upper to lower case and to special characters; the STOP key erases all the
characters before the cursor. Once the name has been modified, press ENTER.
Change name?
ENTER: Accept
ESC: Cancel
¾
If you wish to return to the previous menu you should press the ESC key.
5. PHASE NAME
After pressing the ENTER key we have three options:
CREATE PHASE NAME
COPY PHASE NAME
CHANGE PHASE NAME