01SEP05 1004GB
Cat. 20 / Tab. 05.51 / Page 06.02
1
Respiratory Protective Device, possibly with fresh air supply.
2
Goggles, possibly shield mask in connection with fresh air supply.
For fire/explosive dust, the following must also be used:
3
Fire Retardant Suit.
4
Fire Retardant Working Gloves.
5
Safety
Footwear.
6
Safety
Helmet.
7
Sparkless tools wherever possible.
Inspection of filters from the clean air side/in the clean air chamber may be performed only when the
filter system has stopped.
For this, also the personal safety equipment referred to above must be used.
If cleaning is performed using a vacuum cleaner, protection must be provided against static electric
charging in the suction arrangement.
Boring of holes in filter housing or adjoining pipe ducts may be performed only when the system has
stopped and been cleaned, while taking great care and without any heat generation.
If any faults occur in the electric system which make the system stop, and restart has been cut, the faulty
component may not be removed to allow for further operation. Proper troubleshooting and repair prior to
restarting must be performed.
Disposal of replaced components, dust/waste from cleaning, as well as other waste, must be performed to
the guidelines for the particular materials. These guidelines will usually have been laid down by the local
authorities. In case of doubt, the person responsible for company safety should be consulted.
